Rohde & Schwarz R&S NRP-Z91 - Page 84

R&S NRP-Z91 Remote Control - Commands
1168.8579.12 6.25 E-3
Command Parameter Unit Default setting Page
INITiate:IMMediate 6.19
TRIGger:COUNt[?] 1 to 2
31
1 6.18
TRIGger:DELay[?] 0 to 100.0 s 0.0 6.19
TRIGger:DELay:AUTO[?] OFF | ON OFF 6.20
TRIGger:HOLDoff[?] 0.0 to 10.0 s 0.0 6.20
TRIGger:HYSTeresis[?] 0.0 to 10.0 dB 0.0 6.20
TRIGger:IMMediate 6.20
TRIGger:LEVel[?] x to y W
10 × x
6.20
TRIGger:SLOPe[?] POSitive | NEGative POSitive 6.21
TRIGger:SOURce[?] HOLD | IMMediate | INTernal | BUS |
EXTernal
IMMediate 6.21