Installed Software
R&S
®
SFE100
53Getting Started 2112.4122.62 ─ 13
Figure 10-1: Windows XP Recovery and Backup Embedded Partition dialog
Important information for the R&S SFE100 models 02, 03
The recovery of the system partition factory version is running in the background (unat-
tended). Do not prompt any actions before this process is completed. If the "Win-
dows
XP Recovery and Backup Embedded Partition" dialog is displayed (happens only
if the installed image is older than LPCx_SFE_0024), you must not select "Factory
Default" to avoid problems due to interference with the running background process.
For R&S SFE100 models 12/13, continue as described in one of the following chap-
ters.
●
The Chapter 10.3.3.1, "Backing Up Current System Partition", on page
53
●
The
Chapter 10.3.3.2, "Recovering the Selected Version of System Partition",
on page 54
●
The Chapter 10.3.3.3, "Recovering the Factory Default", on page 55
●
The Chapter 10.3.3.4, "Deleting Backups", on page 56
10.3.3.1 Backing Up Current System Partition
Only R&S SFE100 models 12, 13.
Windows XP Recovery and Backup Partition
To Next Page
Loading...
