R&S SMU200A Baseband Digital IQ-Output (Option R&S SMU/SMJ-B18)
1007.9845.82 1.89
E-12
Function External Data
The equipment layout for generating the digital modulation signals includes the options R&S SMU-B13
(Baseband Main Module) and R&S
SMU-B10 (Baseband Generator).
Test equipment - Vector signal generator DUT (table 1-1, pos. 4), Signal Analyzer
R&S FSQ with option R&S FSQ-K70 (Vector Signal Analysis)
(table 1-1, pos.11)
Test setup
Connect DATA and CLOCK outputs of signal generator to DATA
and CLOCK inputs of test DUT.
Connect the DUT I/Q-outputs to the I/Q-inputs of the signal
generator
Connect signal analyzer to RF output of signal generator
Test method As described above (test of external clock), but now the data from the
external input is also evaluated.
To Next Page
Loading...
