R&S SMU200A Windows XP Recovery and Backup Partition
1007.9845.32 4.5 E-3
5. Select the Restore button with the rotary knob
6. Start the recovery with the
ENTER key
T
he script which is performed during recovery is displayed.
After the recovery the instrument is shut down and switched off.
Recover Factory Default
1. Select the Factory Default button in the Windows XP Recovery and Backup Partition menu with
the rotary knob to recover the factory version of the system partition.
2. Open the Factory Default menu with the
ENTER key.
The menu shows the versions of the firmware and the software platform on delivery.
7. Select the Restore now button with the rotary knob.
8. Start the recovery with the
ENTER key
The script which is performed during recovery is displayed.
After the recovery the instrument is shut down and switched off.
Delete Backups
Up to five backups in addition to the factory default can be stored on the recovery partition. To provide
space for new backups it might be neccessary to remove older backups. The factory default cannot be
deleted.
1. Select Remove Backup button in the Windows XP Recovery and Backup Partition menu with
the rotary knob to delete a selected backup.
2. Open the Remove Backup menu with the ENTER key
The menu shows the versions of the firmware and the software platform of the backup displayed in
the Select Backup window.
To Next Page
Loading...
