R&S SMU200A Installing the Options
1007.9845.32 4.7 E-3
Software Options
All available software options are already included in the latest firmware. They are ready to operate after
they are enabled by means of a key code supplied with the option.
Only if the R&S SMU is equipped with an older firmware version, a firmware update prior to enabling the
software option may be required. The information on the valid firmware versions for the purchased
s
oftware option is provided together with the option.
The key code is to be entered into the
SETUP Install SW Option menu.
The SETUP Installed Options menu provides information on the already installed options.
To Next Page
Loading...
