R&S SMU200A Spare Parts
1007.9845.82 5.1 E-2
5 Documents
Spare Parts
The stock numbers necessary for ordering replacement parts and modules can be found in the compo-
nent lists further down.
CAUTION
Risk of shock hazard and instrument damage
When replacing a module please note the safety instructions and the repair
instructions given in chapter 3 and at the beginning of this service manual
When shipping a module be careful to provide for sufficient mechanical and
antistatical protection.
Available Power Cables
Table 5-1 List of power cables available
Stock No. Earthed-contact connector Preferably used in
DS 0006.7013.00 BS1363: 1967' 10 A 250 V
complying with IEC 83: 1975 standard B2
Great Britain
DS 0006.7020.00 Type 12 , 10 A 250 V
complying with SEV-regulation 1011.1059,
standard sheet S 24 507
Switzerland
DS 0006.7036.00 Type 498/13 10 A 250 V
complying with US-regulation UL 498,
or with IEC 83
USA/Canada
DS 0041.4752.00 GB2099 , GB1002 10 A 250 V
approvals CCC
China
DS 0041.6232.00 JIS C 8303 7A 125V AC
approvals PSE (JET)
Japan
DS 0006.7107.00 Type SAA3 10 A, 250 V,
complying with AS C112-1964 Ap.
Australia
DS 0025.2365.00
DS 0086.4400.00
DIN 49 441, 10 A, 250 V, straight
approvals VDE,ÖVE,CEBEC,KEMA,S,D,N,FI,LCIE,IMQ,UCIEE
DIN 49 441, 10 A, 250 V, angular
approvals VDE,ÖVE,CEBEC,KEMA,S,D,N,FI,LCIE,IMQ,UCIEE
Europe (except Switzerland)
To Next Page
Loading...
