R&S SMU200A Service and Repairs
1007.9845.32 0.1 E-1
Contents of the Manuals for the R&S SMU200A
Service manual - instrument
This service manual for the instrument contains information on checking specs, instrument align-
ment, repairs and troubleshooting. The service manual – instrument contains all the information you
will need to repair the instrument by means of board replacement.
The service manual has four chapters and an annex (Chapter 5) which contains the instrument
documentation:
Chapter 1 Contains all the information you will need to check specs and lists the test equip-
ment required.
Chapter 2 Describes the manual alignment of the frequency and DC measurement accu-
racy, automatic alignment after board replacement and also system error calibra-
tion.
Chapter 3 Describes the instrument design and simple repair and troubleshooting strate-
gies. Board replacement plays a key role.
Chapter 4 Contains information on expansions and modifications achieved by updating in-
strument software and by retrofitting options.
Chapter 5 Describes how to return the instrument and order spare parts. It also contains
spare parts lists and exploded diagrams of the instrument.
Operating manual
The operating manual contains all the information you will need about the technical characteristics of
the instrument, putting the instrument into operation, the basic operating procedures, controls and
displays, menu operation and remote control.
By way of an introduction, typical measurement tasks are explained using menu screen-shots and
program examples.
The operating manual also contains notes on maintenance and explains how to troubleshoot faults
using the warnings and error messages output by the instrument.
To Next Page
Loading...
