Why is there no sound from the lower keyboard on my Roland Atelier AT-90SL?
If you're not hearing sound from the Lower keyboard on your Roland Musical Instrument, it could be that Drums/SFX are selected, but you're playing a key to which no drum sound is assigned. Either turn the Drums/SFX off or play keys to which drum sounds are assigned.
What to do if I can't use the function assigned to the foot switch on my Roland Atelier AT-90SL Musical Instrument?
If you can't use the function assigned to the foot switch on your Roland Musical Instrument, it's likely because “Regist Shift” is set to “RIGHT,” “LEFT,” or “RIGHT + Load Next,” which dedicates the foot switch to switching the Registration. Turn “Regist Shift” off to restore the foot switch's assigned function.
How to fix a Roland Atelier AT-90SL Musical Instrument that won't turn on?
If your Roland Musical Instrument doesn't power on, the most likely reason is that the power cord is not connected correctly. To solve this, ensure the power cord is properly connected.
Why is there no sound when connecting a MIDI instrument to my Roland Musical Instrument?
If you are not hearing sound when a MIDI instrument is connected to your Roland Musical Instrument, the power of the connected external devices might not be turned on, or the Computer switch on the bottom of the unit is not set to “MIDI.” Use the correct procedure to turn on the power of the connected external devices and change the setting of the computer switch.
Why is the volume low on my Roland Atelier AT-90SL connected to AT-90SL?
If the volume level of the instrument connected to AT- 90SL Roland Musical Instrument is too low, you might be using a connection cable that contains a resistor. Use a connection cable that does not contain a resistor.
Why is the pitch off on my Roland Atelier AT-90SL?
If the pitch is off on your Roland Musical Instrument, it could be due to several reasons: * Transpose is in effect. Simultaneously press the Transpose [-] [+] buttons to cancel the transposition. * The tuning is incorrect. Adjust the standard pitch. * While set for an octave shift, you are playing keys beyond the recommended range. Adjust the Octave Shift setting.
Why is the sound distorted on my Roland Musical Instrument?
If your Roland Musical Instrument's sound is distorted or cracked: * Reduce the Part Balance volume of each part by pressing the Part Balance button. * Lower the Reverb volume or adjust the Part Balance of each part. * Use the [Master Volume] slider to decrease the overall volume.
General| Polyphony | 128 voices |
|---|---|
| Tones | Over 900 tones |
| Pedalboard | 20 keys (C2 to G3) |
| Sound Engine | SuperNATURAL Piano |
| Effects | Reverb, Chorus |
| Display | LCD display |
| Connectivity | MIDI In/Out |
Essential safety measures for using electric products, covering warnings and precautions.
Specifies wire colors for UK mains plug connections for safety.
Explains warning symbols and notices for safe operation and potential hazards.
Lists essential guidelines for safe usage, handling, and environmental considerations.
Recommendations for safe power supply connection, unit placement, and ventilation.
Identifies and explains the function of each numbered control on the instrument's panel.
Steps for connecting the power cord and safely powering the unit on and off.
Introduction to selecting sounds (Voices) and understanding keyboard parts.
How to select rhythms, use user memory, and search for rhythms.
Methods for starting, stopping, and adding variety to rhythm performances.
How to use Arranger, Chord Intelligence, Leading Bass, and Tempo settings.
Overview of registration buttons and how to store panel settings.
How to recall, change timing, name, save, load, and delete registrations.
Procedure for formatting disks and saving/deleting registration sets.
How to transpose keys and adjust sound brightness using sliders.
How to use foot switches for various functions and adjust expression pedal depth.
How to add harmony and apply rotary effects for richer sound.
Applying chorus, sustain length, and various reverb types and depths.
Overview of using the lower keyboard for solo voice, bass, and drum sounds.
How to play solo voice on the lower keyboard and change split point settings.
How to play bass voice using the [Bass Split] button and change split points.
Overview of composer buttons and track assignments for recording.
How to play back songs, SMF files, and mute specific tracks.
Procedure for recording, re-recording, erasing, and naming performance songs.
How to save performance data to floppy disks and load songs into memory.
How to delete specific measures or entire tracks from recorded performance data.
How to erase specific data events or copy measures within a song.
Solutions for power, no sound, volume, and voice selection problems.
Troubleshooting for MIDI connections, pedal operations, and foot switch assignments.
Guidance on understanding and resolving various error messages.
To Next Page