Roland Fantom-S88 - Try Out the Various Performance Features; Moving Your Hand Above the D Beam Controller to Apply Effects (D Beam Controller)

15
Try Out the Various Performance Features
The Fantom-S is equipped with a variety of powerful performance features that can raise your
musical expressiveness to new levels. These include the D Beam controller and the Arpeggio
function. Take a moment to try out some of the Fantom-S’s performance features.
Moving Your Hand Above the D Beam
Controller to Apply Effects (D Beam Controller)
You can apply various effects to the currently selected patch by simply moving your hand over
the D Beam controller on the Fantom-S’s panel.
Let’s select a patch that makes use of the D Beam controller, and try it out.
1.
Press [PATCH/RHYTHM] to access the Patch Play screen.
2.
Press [1 (Kbd Part)] to select a patch "PR-E: 032 SynthForce." (p. 7)
3.
Press [7] to switch the Patch Play screen.
fig.Q-17.e
With the factory settings, “Breath” is assigned to the D Beam controller.
4.
When the D BEAM [ASSIGNABLE] indicator is dark, press [ASSIGNABLE], so
that its indicator lights.
fig.Q-18
The D Beam controller is now active.
5.
Move your hand up and down slowly over the D Beam controller as you play
the keyboard.
fig.Q-19
6.
To turn off the D Beam controller, press [ASSIGNABLE] once again so that its
indicator light goes out.
D Beam controller is turned OFF
for the Pad part
D Beam controlleris turned ON
for the Keyboard part
When the D Beam controller is
responding, the
[ASSIGNABLE] button will
b
link. Once you leave the
usable range of the D Beam
controller, the [ASSIGNABLE]
b
utton stops blinking, and
lights solidly instead.
Fantom-s_e.book 15 ページ ２００３年５月１５日 木曜日 午後１時２５分