Roland Fantom-S88 - Switching to Another Rhythm Group; Changing Rhythm Group Settings

23
Try Out the Various Performance Features
Switching to Another Rhythm Group
1.
Press ARPEGGIO/RHYTHM [SETUP/EDIT] and then press [1 (Rhythm Group)].
The Rhythm Group window appears.
fig.Q-30a_50
2.
Use to select “Rhythm Group,” then turn the VALUE dial to change
the value.
3.
Verify that the ARPEGGIO/RHYTHM [ON/OFF] indicator is lit, and strike the
pads to play rhythms.
Changing Rhythm Group Settings
1.
Press ARPEGGIO/RHYTHM [SELECT/EDIT].
2.
Press [1 (Rhythm Group)], and then press [EDIT].
The Rhythm Group Edit window appears.
fig.Q-31
In this window you can make various settings for a rhythm group, such as assigning a rhythm
pattern number or percussion instrument to each pad.
3.
Use [CURSOR] and the VALUE dial to edit the parameters.
In this window you can adjust various settings for rhythm groups.
• Pad
Select the pad 1–16 for which you will make settings. You can also select a pad by pressing it
directly.
• Pad Mode
Specifies whether a rhythm tone (Note) or a rhythm pattern (Pattern) number will be assigned
to the pad.
• Pad Note
If Pad Mode is set to Note, specifies the note number (C-1–G9) that will sound when you press
the pad.
• Pad Velocity
Specifies the strength of the sound (REAL, 1–127) heard when you strike the pad. If this is set
to REAL, you can add dynamics by varying the strength of your strike.
Fantom-s_e.book 23 ページ ２００３年５月１５日 木曜日 午後１時２５分