27
Try Out the Various Performance Features
Using the RPS Function
RPS (Realtime Phrase Sequence)
is a function that lets you freely assign single-part patterns
to the keyboard and play them back them by pressing a single key or pad. Since different
phrases can be played back by pressing different keys or pads, this feature can be especially
useful in live performance.
fig.Q-12-01.e
As an example, here’s how a phrase recorded in pattern 1 can be played from a pad or key.
Create the Pattern
1.
Press [PATCH/RHYTHM] to access the Patch Play screen.
2.
Press [1 (Kbd Part)] to select the keyboard part.
3.
Press [SEQUENCER] to access the Song Play screen, and then press [2 (Ptn)]
to add a check mark (
✔
). The screen switches to the Pattern Play screen.
4.
Press [REC].
The Realtime Rec Standby window appears.
fig.Q-38
5.
Make sure that the cursor is located at “Rec Track,” and turn the VALUE dial
to select “PTN001.”
This lets us record a phrase on pattern 1.
6.
Press [8 (Start)].
Recording will begin after a one-measure count. Play a phrase on the keyboard.
7.
Press [STOP] to stop recording.
A phrase has now been recorded in pattern 1. Press [RESET] to return to the beginning, and
press [PLAY] to hear the pattern.
8.
Press [SEQUENCER], and in the Pattern Play screen that appears, press [2
(Ptn)] to remove the check mark.
Phrase track 2
Phrase track 1
Phrase track 15
Phrase track 16
Pattern track
Pattern
99
Pattern
100
Song
Pattern
1
Pattern
2
Using RPS is a three-step procedure.
1. Create a pattern (i.e., record into a pattern).
2. Assign the pattern to a note of the keyboard or to a pad.
3. Turn on the RPS button, and press the key or pad to which you assigned the
pattern.
3
4
In this example, you played
the phrase manually and
recorded it in real time. For
more about recording
methods, refer to “Recording
Songs” (p. 141) in the Owner’s
Manual.
Fantom-s_e.book 27 ページ ２００３年５月１５日 木曜日 午後１時２５分
To Next Page
Loading...
