Roland Fantom-S88 - Assigning the Selected Sample to a Part as a Patch (Assign to Keyboard)

36
Creating a Song
Assigning the Selected Sample to a Part as a Patch
(Assign to Keyboard)
The selected sample can be assigned to a part as a patch.
We will use the Assign to Keyboard function to create a patch from the selected sample.
4.
Press [7 (Load Utility)] to access the Load Utility window, and then press[1
(Assign to Kbd)].
The Assign to Keyboard window will appear. Here you can specify the part to which the newly
created patch will be assigned. In this example we will assign the patch to part 1.
fig.Q-CP03_50
5.
Either turn the VALUE dial or use [INC] [DEC] to set the setting to “1”.
6.
Press [8 (Select)], and a message will ask you for confirmation.
7.
Press [8 (Exec)].
A message will ask you for confirmation.
8.
Press [8 (Exec)] once again.
The vocal phrase has now been assigned to part 1.
9.
Play the C4 key of the keyboard.
The vocal phrase will sound.
fig.Q-CP04
10.
Press [EXIT] to return to the previous screen.
In the Load Utility window
you can execute various
operations on a sample.
If you decide to cancel, press [7
(Cancel)].
Fantom-s_e.book 36 ページ ２００３年５月１５日 木曜日 午後１時２５分