Roland Fantom-S88 - Assigning a Vocal Phrase to a Part as a Patch

35
Creating a Song
Assigning a Vocal Phrase to a Part as a Patch
To part 1 we will assign a vocal phrase as a patch. We will use sample data that the Fantom-S
already contains.
1.
Press [SAMPLE LIST].
The Sample List screen will appear.
fig.Q-CP01
2.
Press [1 (Preset)].
“Preset” shows the preset samples. In this example we will use “P0001 R&B Vocal F1.”
3. Press or to select “P0001 R&B Vocal F1.”
You can audition the sample by pressing [8 (Preview)].
Next we will create a patch from this sample, and assign it to a part.
fig.Q-CP02_50
What is a sample? This term
indicates waveform data
sampled by the Fantom-S. A
sample consists of the actual
waveform data together with
sample parameters such as
loop start and loop end points.
Fantom-s_e.book 35 ページ ２００３年５月１５日 木曜日 午後１時２５分