Roland Fantom-S88 - Changing D Beam Controller Settings

16
Try Out the Various Performance Features
Changing D Beam Controller Settings
1.
Hold down [SHIFT] and press D BEAM [ASSIGNABLE].
The D Beam Assignable screen appears.
fig.Q-20
In this window you can modify the settings for the D Beam controller. Let’s change what the D
Beam controls.
2.
Press [CURSOR] to move the cursor to “Type,” and then turn the VALUE dial.
For example, if you specify “Bend Up,” press [ASSIGNABLE], and the pitch will rise if you
move your hand near the D Beam controller while playing the keyboard to produce sound.
3. When you have made setting, press [EXIT].
For details on using the D
Beam controller, refer to
“Modifying the Sound in Real
Time” (Owner’s Manual; p. 34,
P. 98
)
.
Fantom-s_e.book 16 ページ ２００３年５月１５日 木曜日 午後１時２５分