26
Try Out the Various Performance Features
Control Pedal
If an optional expression pedal (EV-5, etc.) is connected to the rear panel PEDAL CONTROL
jack, you can use the pedal to control the volume or timbre of sounds you play.
fig.Q-37
Transpose (Trans)
On the Patch Play, Performance Layer and Performance Mixer screen, you can transpose the
pitch of the keyboard in semitone steps, over a range of G–F# (-5– +6 semitones) by adjusting
the Transpose parameter’s value.
Press [CURSOR] to move the cursor to “Trans” in the upper part of the screen, and turn the
VALUE dial or press [INC] or [DEC] to change its setting.
fig.Q-34
Roland
Use only the specified
expression pedal (EV-5; sold
separately). By connecting any
other expression pedals, you
risk causing malfunction and/
or damage to the unit.
The way in which the sound
changes will depend on the
settings. For details on settings
for parameters controlled by
the pedal, refer to “Making
Control Pedal Settings”
(Owner’s Manual; p. 102).
For details, refer to
“Transposing the Keyboard in
Octave Units (Octave Shift)”
(Owner’s Manual; p. 32).
Fantom-s_e.book 26 ページ ２００３年５月１５日 木曜日 午後１時２５分
To Next Page
Loading...
