Roland Fantom-S88 - Sample Key and Original BPM

37
Creating a Song
Sample Key and Original BPM
If you play the patch created by Assign To Keyboard from a note other than C4 of the keyboard,
it will sound differently. This is because the “Original Key” parameter of this sample has been
set to “C4”. The original key is the note number (a number assigned to each key) that will play
the sample at the pitch at which it was sampled. To view this setting, use the following steps.
1.
Press [SAMPLE LIST], and then press [1 (Preset)].
2. Press or to select “P0001 R&B Vocal F1.”
3. Press [SAMPLE EDIT], and then press [2 (Sample Param)].
The Sample Parameter screen will appear.
fig.Q-CP06
“Original Key” is set to “60 (C4)”.
Also notice that “BPM” is set to “92”. This is the original tempo of the sample. You should set
the tempo of the song we will be recording to “92” so that it will match the tempo of this phrase.
4. Press [7 (Exit)].
5. Press [EXIT] to return to the previous screen.
Fantom-s_e.book 37 ページ ２００３年５月１５日 木曜日 午後１時２５分