Roland Fantom-S88 - Assign the Pattern to a Key or Pad; Use the RPS Function

28
Try Out the Various Performance Features
Assign the Pattern to a Key or Pad
1.
Hold down [SHIFT] and press [RPS].
The RPS Setup screen appears.
fig.Q-40
2.
If you want to play the pattern from a pad, press the pad to which the pattern
is to be assigned. If you want to play the pattern from a key, press the key to
which the pattern is to be assigned.
The cursor will move to “Pattern.”
3.
Turn the VALUE dial to select “PTN001.”
With these settings, pressing the pad or key you selected in step 2 will play pattern 1, which
you recorded earlier.
4.
Press [7 (RPS Sw)] to turn on the RPS function.
The RPS button at the left of the screen will also light.
fig.Q-41
5.
Press [8 (Exit)] to return to the previous screen.
This completes the preparations.
Use the RPS Function
1.
Keep pressing the key or pad that you selected in step 2 of “Assign the
pattern to a key or pad.”
While you are pressing the key or pad, the pattern will play once.
For example, a complex phrase that would be difficult to play manually could be assigned to a
key or pad, and played with one finger during a live performance.
2.
Press the RPS button to turn off the RPS function.
Fantom-s_e.book 28 ページ ２００３年５月１５日 木曜日 午後１時２５分