40
Creating a Song
2.
In time with the metronome, practice playing the rhythm part on the pads.
First practice the bass drum and snare drum.
fig.score2
3.
When you have finished practicing, press [REC] to begin recording.
The [REC] indicator will change from blinking to lit, and recording will begin. The measure is
shown in the Realtime Recording window. Since we are using Mix recording, it is not necessary
for you to record the full two measures completely. Even if you record one measure at a time,
each recording pass will be added to the previously recorded material.
4.
When you have finished recording, press [7 (Rehearsal)].
The [REC] indicator will change from lit to blinking, and the Rehearsal function will be turned
back on, temporarily disabling recording.
Rhythm part
Bass Drum
Snare Drum
Bass Drum
Snare Drum
If You Make a Mistake (Realtime Erase)
Realtime Erase is a function that erases unwanted data while you are still recording. This
function is convenient during Loop recording since you can erase data without halting
recording.
1.
In the Realtime Recording window, press [6 (Erase)].
If this window is not displayed, press [PLAY] during recording to access it. Each time you press
[PLAY], the Realtime Recording window will alternately be hidden or displayed.
fig.Q-47b_50
2. If you press [7 (Erase All)], all data will be erased. To erase notes of a
specific pad, press that pad. Data will be erased while you continue
pressing that pad.
Fantom-s_e.book 40 ページ ２００３年５月１５日 木曜日 午後１時２５分
To Next Page
Loading...
