2
Operating Guide
Changing the Pitch Range of the Keyboard in Octave Steps
You can change the pitch range of the keyboard in steps of one
octave.
Changing the keyboard
pitch range
-3–0–3
Use the [
] [ ] buttons
(the display indicates “ ” or “ ”).
MEMO
When you’re making settings (p. 10), these buttons also
operate as cursor buttons [ ] [ ] to select parameters.
Adjusting the Overall Volume
You can adjust the volume of the speakers
if you’re using the built-in speakers, or the
volume of the headphones if headphones
are connected.
Adjusting the volume 0–20
Making Various Settings (Setting)
You can make various detailed settings for this instrument.
1. Press the [ ] button (the display indicates “ ”).
2. Use the cursor [ ] [ ] buttons to select an item.
3. Use the [I] [H] buttons to change the value of the setting.
Depending on the item that is selected, proceed with the
operation by pressing a button such as [s].
4. Press the [ ] button when you’re nished making settings
(“ ” is unlit).
Playing Internal Songs
1. Press the [ ] button.
2. Use the [I] [H] buttons to select a song.
3. Press the [s] button to play (the display indicates “J”).
4. Press the [s] button to stop (“J” is unlit).
5. Press the [ ] button to return to the play screen.
Play/stop
Press the [s] button.
MEMO
5 When selecting a song, you can long-press the [–] or [+] button
to rapidly switch between songs.
5 To change the tempo of an internal song, change the
metronome tempo.
Reference
5 For details on the internal songs, refer to “Song List” at the end of
this manual.
5 You can choose how the piano tone is sounded for internal
songs (p. 10).
Sounding the Metronome
Here’s how to sound the metronome.
Sound the metronome
Press the [
] button (the display
indicates “ ”).
Change the tempo
5–300
While holding down the [
] button
so that “TEMPO” is indicated, use the
[I] [H] buttons.
Selecting a Tone
This instrument lets you enjoy playing with a variety of tones.
There are four groups of tones; each tone button selects a group.
1. Press a tone button such as [ ], and then use the [I] [H] buttons.
If a tone other than a drum tone is selected: the display indicates
“ ”
For drum sounds: the display indicates “
”
Reference
For details on the tones, refer to “Tone List” at the end of this
manual.
Tone groups
Button Explanation
[
] button
Piano tones
[
] button
Electric Piano tones
[
] button
Organ tones
[
] button
Drum, voice, and other tones
To Next Page
Loading...
Need help?
General
Weight and Dimensions
