4
Operating Guide
Connecting Equipment
PHONES/OUTPUT jack
You can connect headphones
(sold separately) or an amplied
speaker here.
If this is connected, the display
indicates “
.”
DC IN jack
Connect the
included AC adaptor
here.
AUX IN jack
You can connect an
audio player (such as a
smartphone) or other
audio playback device
here.
PEDAL jack
You can connect a pedal switch
(sold separately: DP series) and
use it as a hold pedal.
If this is connected, the display
indicates “
.”
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
Installing Batteries
If six commercially available nickel-metal hydride or alkaline AA batteries are installed, you can perform
without connecting an AC adaptor.
1. Remove the battery cover.
2. Install the batteries, making sure that they are oriented correctly.
3. Close the battery cover.
* When turning the unit over, be careful so as to protect the keyboards from damage. Also, handle the
unit carefully; do not drop it.
* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you
carefully observe all of the items related to batteries that are listed in “USING THE UNIT SAFELY” and
“IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s Manual p. 17).
* When the batteries run low, the display indicates “Battery Low!” When this occurs, install fresh batteries.
* If this unit is being operated on batteries, it cannot be connected to a wireless network (you cannot use the Amazon Alexa functionality). If you
want to connect to a wireless network, connect the AC adaptor to a power supply.
921
928
947
To Next Page
Loading...
Need help?
General
Weight and Dimensions
