10
Panel Descriptions
Front Panel
fig.0-01.e
ROLL/HOLD Button
When this button is lit, the sound
will repeat like rolls while pressing
a pad (p. 16).
REALTIME MODIFY Section
Turn these knobs to modify the
sound (p. 19).
PATCH SEL Button
Striking the pad while holding
down this button changes the
patch (p. 23). This button is
used as the shift button of some
operations, too.
Patch Select
Section
Changes the patch (p. 22).
Ribbon (L)
Slide your finger
on this ribbon to
produce a sound
or to control the
tone (p. 15).
PATCH/VALUE Dial
Turn to select a patch or change the value.
Pad
Strike to produce a
sound or press to
control the tone (p.15).
Ribbon (R)
VOLUME Knob
Adjusts the volume of the entire HPD-15.
When this knob is turned fully counterclockwise,
no sound will be output.
Sequencer Section
You can record and play back
your performance (p. 59).
D BEAM
Pass your hand to produce or
control the sound (p. 16).
To Next Page
Loading...
