EasyManua.ls Logo

Roland HandSonic HPD-15 - Configuring Effects (Reverb, Multi-FX)

Roland HandSonic HPD-15
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
Chapter 2 Modifying a Patch
Chapter 2
Effect Settings
You can add reverberation to the sound to create the
sensation of playing in a hall or on stage, apply distortion to
the sound, or add depth, spaciousness, and modulation.
* The effect will apply to all pads / D Beam / ribbons.
Adjusting the Reverb Settings
Reverb adds reverberation to the sound to simulate a
spacious ambience.
Parameter Category: REVERB
fig.2-12
Type: Refer to REVERB/DELAY Type (p. 95)
Selects the preset setting of reverb.
If you wish to make even more detailed settings, adjust the
algorithm and parameters below. When you change a value,
a # will appear beside the Type.
Algo: OFF, Room12, Stage, Plate, Hall12,
Delay, PanDly
Selects the type (algorithm) of reverb. If you select OFF no
reverb will be applied, and the following parameters will not
be displayed.
Room1: Simulation of the reverberation in a room
Room2: Brighter reverb than Room1
Stage: Simulation of on-stage reverberation
Plate: Simulation of a metal plate reverb
Hall1: Simulation of a larger space than Room
Hall2: Brighter reverb than Hall1
Delay: Standard delay (Echo)
PanDly: Delay that pans (moves) the reflection between
left and right
Level: 0127
Adjusts the volume of the reverberation (or delay sound).
Time: 0127
If Algo is Room1Hall2, this adjusts the duration of the
reverberation. If Algo is Delay or PanDly, this adjusts the
delay time.
HF Damp: 200Hz8kHz, THRU
Adjusts the currently at which the high range of the
reverberation will be cut. As you lower the frequency, more
of the high range will be cut, producing a softer sound. If you
do not wish to cut the high range, set this to THRU.
Dly Feedback: 0127
Adjusts the number of times that the delay sound will be
repeated.
* This will be displayed only if Algo is Delay or PanDly.
fig.2-13.e
If you change the Type, the algorithm of the reverb and the
values of the parameters will be changed to the setting of
each type.
U0101 REVERB/DLY
Type# Room1
Direct Sound
Reverb Sound
Time
Level
Dly Feedback
Level
Time
Algo: Room12, Stage, Plate, Hall12
Algo: Delay, PanDly
Delay Sound
Direct Sound

Table of Contents

Other manuals for Roland HandSonic HPD-15

Related product manuals