Roland JUNO-Gi - Using Insert Effects; Displaying the Recorders Effects Screen; Turning each Effect On;Off (SWITCH); Selecting an Insert Effect

106
Using Insert Eects
Displaying the Recorder’s Eects
Screen
1. In the RECORDER screen, [6] (EFFECT) button.
The recorder’s eects screen will appear.
Function Buttons
Button Explanation Page
[1] (INS FX) Opens the INSERT FX screen. p. 106
[1] (MASTER)
(only in Mastering mode)
Opens the Mastering Tool Kit.
p. 118
[2] (REVERB) Opens the Reverb screen. p. 117
[4] (LOC)
(only when an insert eect is selected)
Changes the insert eect connection
location.
p. 108
[5] (EDIT)
(only when an insert/mastering eect is
selected)
Edits the eect.
p. 107
[6] (SWITCH) Turns each eect on/o. p. 106
2. Use the [1] (INS FX)–[2] (REVERB) buttons to switch to the
eect screen that you want to see.
Turning each Eect On/O (SWITCH)
1. In the recorder’s eects screen, press the [6] (SWITCH)
button.
2. Press the [1] (INS FX)–[2] (REVERB) buttons to turn each
eect on/o.
Button Eects
[1] (INS FX) Insert Eects
[1] (MASTER)
(Mastering mode only)
Mastering Tool Kit
[2] (REVERB) Reverb
3. To close the setting window, press the [6] (CLOSE) button or
the [EXIT] button.
Selecting an Insert Eect
1. In the recorder’s eects screen, press the [1] (INS FX) button.
The INSERT FX screen will appear.
2. Use the cursor buttons to move the cursor, and use the
VALUE dial or the [DEC] [INC] buttons to change the bank,
group and patch.
Turning the Insert Eect Algorithms On/O
1. Use the cursor buttons to move the cursor to each algorithm
of the patch.
2. Use the VALUE dial or the [DEC] [INC] buttons to turn the
selected algorithm on/o.
For details on each algorithm, refer to “Insert Eects Parameters” (p. 109).
On Uppercase indication in solid frame
O Lowercase indication in dashed frame