Roland JUNO-Gi - Tvf Envelope

41
Overview
Appendix
USB Memory
Song Player
Digital Recorder
Synthesizer
Selecting Sounds Perform. Functions Editing/Eects Other Settings
Rec/Play/Edit Eects Rhythm Pattern
Parameter Value Explanation
Cuto V-Sens -64–+63
Use this parameter when changing the cuto
frequency to be applied as a result of changes in
playing velocity.
If you want strongly played notes to raise the
cuto frequency, set this parameter to positive
(+) settings.
Resonance
V-Sens
-64–+63
This allows keyboard velocity to modify the
amount of Resonance.
If you want strongly played notes to have a
greater Resonance eect, set this parameter to
positive (+) settings.
F-Env V-Curve
FIX,
1–7, TONE
Curve that determines how keyboard playing
dynamics (velocity) will aect the TVF envelope
Set this to “FIX” if you don’t want the TVF
Envelope to be aected by the keyboard
velocity.
1 2 3 4
5 6 7
1 2 3 4
5 6 7
F-Env V-Sens -63–+63
Species how keyboard playing dynamics will
aect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope
to have a greater eect for strongly played notes.
F-Env T1 V-Sens -63–+63
This allows keyboard dynamics to aect the T1 of
the TVF envelope.
If you want T1 to be speeded up for strongly
played notes, set this parameter to a positive
(+) value.
F-Env T4 V-Sens -63–+63
Use this parameter when you want key release
speed to aect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly
released notes, set this parameter to a positive
(+) value.
LPF BPF HPF PKG
Cuto frequency
Resonance
Level
Frequency
High
Low
Parameter Value
C4C3C2C1 C5 C6 C7
0
+50
+100
+200
-50
-100-200
o
-1
-2
+1
+2
Cuto Keyfollow
Cuto frequency
(Octave)
Key
4. TVF ENVELOPE
Parameter Value Explanation
F-Env Depth -63–+63
Depth of the TVF envelope
Higher settings will cause the TVF envelope to
produce greater change. Negative (-) settings
will invert the shape of the envelope.
F-Env Time KF
(Time Keyfollow)
-100–+100
Use this setting if you want the TVF envelope
times (T2–T4) to be aected by the keyboard
location.
Based on the TVF envelope times for the C4 key
(center C), positive (+) settings will cause notes
higher than C4 to have increasingly shorter
times.
F-Env Time1 [A]
-64–+63
TVF envelope times (T1–T4)
Higher settings will lengthen the time until the
next cuto frequency level is reached.
F-Env Time2
F-Env Time3 [D]
F-Env Time4 [R]
F-Env Level0
-64–+63
TVF envelope levels (L0–L4)
Specify how the cuto frequency will change
at each point, relative to the Cuto Frequency
value.
F-Env Level1
F-Env Level2
F-Env Level3 [S]
F-Env Level4
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Time Keyfollow
Time
Key
T1 T2 T3 T4
L3
L1
L0
L2 L4
TVF Envelope
Time
Note oNote on
Cuto
Frequency