Roland JUPITER-X User Manual

20
Splitting the Keyboard to Play Different
Sounds (Split)
1. Press the [SPLIT] button to make it light.
Split turns on.
The part 1 tone sounds in the right-hand region of the keyboard,
and the part 2 tone sounds in the left-hand region.
To return to the original state, press the [SPLIT] button once again.
* To change the split point, hold down the [SPLIT] button and press the key
that you want to specify; alternatively, use SCENE ZONE EDIT to set the
KEY RANGE. For details, refer to “Reference Manual” (PDF).
Layering Two Sounds (Dual)
1. Press the [DUAL] button to make it light.
Dual is turned on.
This layers the part 1 tone with the part 2 tone, so that they are
heard together.
To return to the original state, press the [DUAL] button once again.
* If you hold down the [SHIFT] button and press the [DUAL] button to turn
Dual on, settings are automatically made so that part 1 is output from L
and part 2 is output from R.
Transposing the Keyboard in Octave
Units (Octave)
1. Press the OCTAVE [-] [+] button.
To return to the original state, press the OCTAVE [-] and [+] buttons.
Transposing the Keyboard in Semitone
Steps (Transpose)
1. Hold down the [TRANSPOSE] button and press the OCTAVE
[-] [+] button.
To return to the original state, hold down the [TRANSPOSE] button
and press the OCTAVE [-] button and [+] button.
Playing Single Notes (Monophonic)
1. Press the [MONO] button to make it light.
To return to the original state, press the [MONO] button once again.
Layering the Same Tone to Thicken the
Sound (Unison)
1. Press the [UNISON] button to make it light.
To return to the original state, press the [UNISON] button once
again.
Preventing Dynamics Changes in Your
Performance (Velocity Off)
1. Press the [VELOCITY OFF] button to make it light.
Your keyboard dynamics will not affect the sound.
To return to the original state, press the [VELOCITY OFF] button
once again in function mode.
Smoothly Changing the Pitch (Portamento)
1. Press the [PORTAMENTO] button to make it light.
To return to the original state, press the [PORTAMENTO] button
once again.
* You can access the portamento time edit screen by holding down the
[SHIFT] button and pressing the [PORTAMENTO] button.
Using Performance Functions

Roland JUPITER-X Specifications

Power

power supply	AC 117–240 V, 50/60 Hz
power consumption	20W

Sound and Effects

preset tones	4, 000 or greater
user tones	256
drum kits	90 or greater

Connectivity

bluetooth profile support	A2DP, GATT
headphones jacks	Stereo miniature phone type, Stereo 1/4-inch phone type
main out jacks	1/4-inch phone type, XLR type

Weight and Dimensions

width	1, 090 mm
depth	447 mm
height	119 mm
weight	16.9 kg