Roland JUPITER-X User Manual

JUPITER-X Owner’s Manual Ver. 3.0 and later
26
Exporting tones
You can export the user tone data to an SVZ file.
* You can also export tones from models.
1. Press the [MENU] button.
2. Use the [1] knob to select “UTILITY”, and then press the
[ENTER] button.
You can also make this selection by using the PAGE [
ä
] [
å
] buttons
instead of the [1] knobs.
3. Use the [1] knob to select “IMPORT/EXPORT”, and then
press the [ENTER] button.
4. Use the [1] knob to select “EXPORT TONE”, and then press
the [ENTER] button.
5. Use the [1] knob to select where to export the tones from,
and press the [ENTER] button to select them with a check
mark.
6. Press the PAGE [>] button.
7. Move the cursor using the PAGE [<] [>] buttons, and use the
[2] knob to edit the characters.
8. Once you’ve entered the filename, press the [ENTER]
button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
9. To execute, use the [2] knob to select “OK”, and then press
the [ENTER] button.
The tones are exported to the “ROLAND/SOUND” folder on your
USB flash drive.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the “Executing…” display is shown.
Exporting scenes
You can export the scene data to an SVD file.
1. Press the [MENU] button.
2. Use the [1] knob to select “UTILITY”, and then press the
[ENTER] button.
You can also make this selection by using the PAGE [
ä
] [
å
] buttons
instead of the [1] knobs.
3. Use the [1] knob to select “IMPORT/EXPORT”, and then
press the [ENTER] button.
4. Use the [1] knob to select “EXPORT SCENE”, and then press
the [ENTER] button.
5. Use the [1] knob to select where to export the scene from,
and press the [ENTER] button to select it with a check mark.
6. Press the PAGE [>] button.
7. Move the cursor using the PAGE [<] [>] buttons, and use the
[2] knob to edit the characters.
8. Once you’ve entered the filename, press the [ENTER]
button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
9. To execute, use the [2] knob to select “OK”, and then press
the [ENTER] button.
The scenes will be exported to the “ROLAND/SOUND” folder on
your USB flash drive.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the “Executing…” display is shown.
Exporting a step edit pattern
Here’s how a step edit pattern in the scene can be exported to a USB
flash drive as MIDI data (SMF).
1. Press the [MENU] button.
2. Use the [1] knob to select “UTILITY”, and then press the
[ENTER] button.
You can also make this selection by using the PAGE [
ä
] [
å
] buttons
instead of the [1] knobs.
3. Use the [1] knob to select “IMPORT/EXPORT”, and then
press the [ENTER] button.
4. Use the [1] knob to select “EXPORT USER PATTERN”, and
then press the [ENTER] button.
5. Use the PAGE [<] [>] buttons to move the cursor, and use
the [2] knob to change the character.
6. When you’ve specified the file name, press the [ENTER]
button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
7. To execute, use the [2] knob to select “OK”, and then press
the [ENTER] button.
The data is exported to the EXPORT folder of the USB flash drive.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the “Executing…” display is shown.

Roland JUPITER-X Specifications

Power

power supply	AC 117–240 V, 50/60 Hz
power consumption	20W

Sound and Effects

preset tones	4, 000 or greater
user tones	256
drum kits	90 or greater

Connectivity

bluetooth profile support	A2DP, GATT
headphones jacks	Stereo miniature phone type, Stereo 1/4-inch phone type
main out jacks	1/4-inch phone type, XLR type

Weight and Dimensions

width	1, 090 mm
depth	447 mm
height	119 mm
weight	16.9 kg