Setting Parameters (System)
Functions that aect the overall operating environment of the RD-800 are called “system functions.”
For details on how to select parameters, refer to “Accessing the Menu Screens” (p. 26).
Parameter Value Explanation
Master Tune
415.3–440.0–466.2 [Hz]
Tuning to Other Instruments’ Pitches (Master Tune)
For a cleaner ensemble sound while performing with one or more other instruments, ensure that each instrument’s basic pitch is in tune with that
of the other instruments. In general, the tuning of an instrument is indicated by the pitch in Hertz (Hz) of the middle “A” note.
EQ Mode
Retaining the Equalizer Settings Even When the Live Set Is Switched
(EQ Mode)
You can store dierent equalizer settings (p. 15) for each individual Live Set (p. 10).
This setting determines whether or not the Live Set equalizer settings values are to be changed when Live Sets are switched.
LIVE SET When you switch Live Sets, the equalizer settings will also switch.
REMAIN When you switch Live Sets, the equalizer settings will not change.
Select Button
Mode
Retaining the Function Select Button Settings Even When the Live
Set is Switched (Select Button Mode)
Function select button settings (p. 16) can be stored individually for each Live Set (p. 10).
You can specify whether the function select button settings will or will not change to the functions stored in each Live Set when you switch a Live
Set.
LIVE SET When you switch Live Sets, the function select button settings will also change.
REMAIN When you switch Live Sets, the function select button settings will not change.
Pedal Mode
Retaining the Pedal Settings Even When the Live Set Is Switched
(Pedal Mode)
Pedal settings (p. 29) can be stored for each Live Set (p. 10).
This setting determines whether or not the pedal settings are switched to the values stored in the Live Set you are switching to.
LIVE SET When you switch Live Sets, the pedal settings will also change.
REMAIN When you switch Live Sets, the pedal settings will not change.
S1/S2 Mode
Retaining the [S1] [S2] Button Settings Even When the Live Set Is
Switched (S1/S2 Mode)
The settings of the [S1] [S2] buttons can be stored for each Live Set (p. 10).
This setting determines whether or not the settings of the [S1] [S2] buttons are switched to the values stored in the Live Set you are switching to.
LIVE SET When you switch Live Sets, the settings of the [S1] button and [S2] button will also change.
REMAIN When you switch Live Sets, the settings of the [S1] button and [S2] button will not change.
Assign 1-5 Mode
Retaining the Assign 1–5 Controller Settings Even When the Live Set
Is Switched (Assign 1-5 Mode)
The settings of the Assign 1–5 controllers (p. 28) can be stored individually for each Live Set (p. 10).
You can specify whether the Assign 1–5 controller settings stored in the Live Set will or will not change when you switch Live Sets.
LIVE SET When you switch Live Sets, the Assign 1–5 controller settings will also change.
REMAIN When you switch Live Sets, the Assign 1–5 controller settings will not change.
Delay Mode
Retaining the Delay Settings Even When the Live Set Is Switched
(Delay Mode)
Delay settings (p. 31) can be stored individually for each Live Set (p. 10).
You can specify whether the delay settings will or will not change to the values stored in each Live Set when you select a Live Set.
LIVE SET When you switch Live Sets, the delay settings will also change.
REMAIN When you switch Live Sets, the delay settings will not change.
Detailed Settings for Each Function
40
To Next Page
Loading...
