Roland RD-800 - System and Live Set Initialization; Factory Reset and Live Set Import; Initializing a Live Set

Detailed Settings for Each Function
Restoring the Factory Settings (Factory Reset)
The settings stored in the RD-800 can be returned to their factory
settings.
NOTE
• When you execute “Factory Reset All,” all Live Sets saved in banks
A–J are returned to their factory settings.
If you want to keep the stored content, save your Live Set les
(p. 44).
• If you’re currently connected via USB, be absolutely sure to
disconnect the USB cable before starting.
Parameter Explanation
Factory Reset Current
The currently selected Live Set is returned to the
factory settings.
Factory Reset All
All Live Sets and system settings in the RD-800 are
returned to their factory-set state.
For details, refer to “Restoring the Factory Settings
(Factory Reset)” (p. 27).
Importing a Specic Live Set from a Live Set
File (Live Set Import)
From a Live Set le that you saved, you can import a specic Live
Set into the desired number.
NOTE
When you import a Live Set, the Live Set that had occupied the
import-destination will be erased.
If you want to keep the stored content, save your Live Set les
(p. 44).
1. Press the [MENU] button to select “Utility,” and press the
[ENTER] button.
2. Use the cursor buttons to select the “Live Set Import,” and
press the [ENTER] button.
The Live Set le selection screen appears.
3. Move the cursor to “Media,” and use the [DEC] [INC]
buttons or the value dial to select the memory from which
you want to import.
Value Explanation
USER MEMORY
Data is loaded from the RD-800’s user memory.
USB MEMORY
Data is loaded from the USB ash drive connected to the rear
panel USB MEMORY/WLAN ADAPTOR port.
4. Move the cursor to “Live Set File,” and use the [DEC] [INC]
buttons or the value dial to select the Live Set le that
contains the Live Set you want to import; then press the
[ENTER] button.
The Live Set selection screen appears.
5. Use the [DEC] [INC] buttons or the value dial to select the
Live Set that you want to import.
6. Press the cursor [I] button.
7. Use the [DEC] [INC] buttons or the value dial to select the
Live Set number into which you want to import the Live
Set; then press the [ENTER] button.
The conrmation message appears.
8. Press the [ENTER] button once again; the Live Set is
imported.
If you decide to cancel, press the [EXIT/SHIFT] button.
NOTE
• Never turn o the power during execution.
• Do not disconnect the USB ash drive during execution.
Initializing a Live Set (Live Set Initialize)
This lets you initialize the settings of the currently selected Live Set.
NOTE
When you initialize a Live Set, the currently selected Live Set will
disappear.
If you want to keep the stored content, save your Live Set les
(p. 44).
1. Press the [MENU] button to select “Utility,” and press the
[ENTER] button.
2. Use the cursor buttons to select the “Live Set Initialize,”
and press the [ENTER] button.
The Live Set Initialize screen appears.
3. Press the [ENTER] button.
The conrmation message appears.
4. Press the [ENTER] button once again to execute
initialization.
If you decide to cancel, press the [EXIT/SHIFT] button.
NOTE
Never turn o the power during execution.
48