Roland RD-800 - Live Set File Operations; Deleting Live Set Files; Copying Live Set Files

Detailed Settings for Each Function
Deleting a Live Set File (Live Set File Delete)
Here’s how to delete a previously saved Live Set le.
1. In the MENU screen, select “Live Set File” and press the
[ENTER] button.
2. Press the Cursor [ ] [ ] buttons to select “Delete,” then
press the [ENTER] button.
3. Move the cursor to “Media” and select the memory from
which you want to delete a Live Set le.
4. Move the cursor to “Live Set File” and use the [DEC] [INC]
buttons or the value dial to select the Live Set le that you
want to delete; then press the [ENTER] button.
The conrmation message appears.
If you decide to cancel without deleting the Live Set le, press the
[EXIT/SHIFT] button.
MEMO
If you choose “ALL,” all Live Set les will be deleted.
5. Press the [ENTER] button to delete the Live Set le.
NOTE
• Be sure never to turn o the power while the delete is in
progress.
• Do not disconnect the USB ash drive while the le is being
deleted.
Copying a Live Set File (Live Set File Copy)
You can copy a Live Set le from the RD-800’s user memory to a USB
ash drive (sold separately).
You can also copy a Live Set le from a USB ash drive to the
RD-800’s internal memory.
1. In the MENU screen, select “Live Set File” and press the
[ENTER] button.
2. Press the Cursor [ ] [ ] buttons to select “Copy,” then press
the [ENTER] button.
3. Use the [DEC] [INC] buttons or the value dial to select the
copy-source media.
Parameter Explanation
USER MEMORY
Copy from the RD-800’s user memory to USB ash drive.
USB MEMORY
Copy from USB ash drive to the RD-800’s user memory .
4. Press the [I] button to move the cursor to the copy-
source Live Set name.
5. Use the [DEC][INC] buttons or the value dial to select the
copy-source Live Set le.
If you decide to cancel without copying the le, press the [EXIT/
SHIFT] button.
MEMO
If you choose “ALL,” all Live Set les will be copied.
6. Press the [ENTER] button to copy the Live Set le.
NOTE
• Be sure never to turn o the power while the copy is in progress.
• Do not disconnect the USB ash drive while data is being
copied.
MEMO
If a le with the same name has already been saved, the
conrmation message “Overwrite OK?” appears. To overwrite the
Live Set le, press the [ENTER] button; to save the le under a
dierent name, press the [EXIT/SHIFT] button.
46