37
2-4 Starting Printing
Chapter 2 Operation
Printing Tests and Cleaning
We recommend performing a printing test to check for problems such as dot drop-out before you carry out actual
printing. If problems such as dot drop-out are found, clean the print heads.
How to Perform a Printing Test
Holding down for one second or longer prints
a test pattern.
You can print the test pattern where you want by using
to move the print-head car-
riage, then pressing
. The front cover may be
left open during movement, but be sure to close it be-
fore you press
.
ABC
Hold down for one
second or longer.
Test pattern
Dot drop-out
To Next Page
Loading...
Need help?
General