Chapter 4 Maintenance and Adjustment
52
4-1 Daily Care and Maintenance
Cleaning
WARNING
Never use gasoline, alcohol, thinner, or any other flammable material.
Doing so may cause fire.
CAUTION
Before attempting cleaning, switch off the sub power and wait until the platen and
dryer cool (approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may cause burns.
➢ This machine is a precision device, and is sensitive to dust and dirt. Perform cleaning on a daily basis.
➢ Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
➢ Never attempt to oil or lubricate the machine.
Grit rollers
Remove buildup of media and other material us-
ing a brush. Never use a metal brush.
Pinch rollers
Periodically wipe away any grime. Failure to clean
properly may result in the transfer of grime to the
surface of media.
Wipe away any buildup of ink or grime on the
media path.
To Next Page
Loading...
Need help?
General