3. Assembly and Ink Filling
11
D
Fully tighten the bolts in the order of
1
(stand rear),
2
(stand side).
Tighten fully
Bolts: 4
E
Attach the other arm to the right side as seen from the rear of the machine.
F
Place the shafts on the arms.
G
Pass the left media holder onto the shafts.
Pass it through from the right edge as seen from the rear of the machine.
Catch the left media holder on the
rear shaft.
Pass the front shaft through
the left media holder.
To Next Page
Loading...
