Roland TrueVIS VG-540 - Step 3: Make the Port Settings for the Software RIP

5. Network Settings
34
Step 3 : Make the Port Settings for the Software RIP
The settings for the software RIP will be made here. For information about how to make the settings, refer to
the documentation of the instructions for the software RIP.
Conrming that a network connection has been established
Roland VersaWorks Dual (hereinafter referred to as "VersaWorks Dual")
You can use the printing-test feature to check whether the connection to the network has been established.
For information about how to carry out a printing test, refer to the documentation for VersaWorks Dual.
Other software RIP
Refer to the documentation for the software RIP you are using.