4
The following items are included with the machine. Make sure they are all present before proceeding.
Power cord (1)
Arms
(1 each for right and left)
Casters (2)
Stand legs
(1 each for right and left)
Stand stay (1) Shafts (2)
Media holders/retaining
screws
(1 each for right and left)
Shaft clamps (2)
Middle pinch rollers * **
(The quantity varies de-
pending on the model.)
Media clamps*
(1 each for right and left)
Replacement wiper (1) Drain bottles (2) Tray pad (3)
Hexagonal
wrench (1)
Pipe (1)
TR cleaning liquid pouches
(2)
Blade holder (1)
Blade (1) Pin (1) Bolts (40)
Washers
(22)
Replacement blades for
separating knife (1)
Cable clamp (1) Tweezers (1)
Cleaning
liquid (1)
Cleaning
sticks
Setup Guide (this docu-
ment) (1)
Read this rst (1)
User's Manual (1)
Inkjet printer mainte-
nance guide (1)
Cartridge-slot label (for
4 colors) (2) ***
Software RIP (1)
* The media clamps and the middle pinch rollers are installed on the machine.
** (6) for the 64-inch model and (5) for the 54-inch model.
*** With the factory default settings, these labels are axed to the platen at the location where the front
cover opens.
2. Included Items
To Next Page
Loading...
