Roland TrueVIS VG-540 - Adjusting the Ink Tube and Affixing a Label (Only When Using Four Colors)

3. Assembly and Ink Filling
15
Step 5 : Adjusting the Ink Tube and Afxing a Label (Only When Using Four Colors)
MEMO
This step is only required when using the machine with four colors: CMYK. If you are using the
machine with seven or eight colors, proceed to "Step 6: Connecting the Cables."
About this procedure
This procedure must be performed by a suitably qualied service technician. Never attempt to perform this
procedure yourself.
CAUTION
Leave this work to a suitably qualied worker.
This procedure includes work near sources of electrical danger and complex
assembly work. Incorrect work may result in injury and mechanical malfunction.
Items used in this procedure
Included Items Cartridge-slot label (for 4 colors)