3. Assembly and Ink Filling
14
Step 4 : Removing the Retainers
IMPORTANT
• Make sure to remove all the retainers. If any remain on the machine, faulty operation or breakdown may
occur when the power is switched on.
• Store the retainers because they are needed again when transporting the machine.
Procedure
A
Remove all the retainers indicated by A, B, C and D.
A B
C
D
A B/C/D
B
Install the retainer indicated by B at the position indicated in the gure for storage.
Bolt removed
in step B
To Next Page
Loading...
