3. Assembly and Ink Filling
24
F
When the screen shown below appears, set the pouch tray in which you have set an
ink pouch in the ink slot whose number is ashing.
When using four colors (CMYK), set the pouch trays in the "2, 4, 6, 8" ink slots. Then, when "1, 3, 5, 7" is
displayed, set the remaining pouch trays in the remaining ink slots.
7 colors (CMYKLcLmLk) 4 colors (CMYK)
SET CARTRIDGE
12345678
SET CARTRIDGE
2 4 6 8
SET CARTRIDGE
1 3 5 7
FILLING INK
>>>>> XX:XX
IMPORTANT
Check the color names indicated on the ink slots and the ink pouches to set all the pouch trays
in their correct positions. Insert the pouch trays as far as they will go.
*The illustration shows the setting of the pouch tray when seven colors are used.
YE
4
3
YE
3
4
4. Fill the machine with TR cleaning liquid.
A
When the screen shown below appears, set the pouch tray in which you have set the
TR cleaning liquid pouch in the cleaning liquid slot.
Insert the pouch trays as far as they will go.
* “CL-LIQUID FOR WIPER” represents the TR cleaning liquid.
SET CL-LIQUID
FOR WIPER
To Next Page
Loading...
