20
Connections and driver installation
Checking for sound output
After the connections have been made correctly, you can play back the
sample data to check your setup.
■ Playing the sample data
Here we will use standard Windows functionality to play the sample data.
The sample data is found in the UA Software CD-ROM. Insert the UA
Software CD-ROM into the CD-ROM drive of your computer.
1
Copy “Alright.wav” to the desktop by dragging it from the “Sample_Data”
folder of the CD-ROM.
2
Right-click the copied file “Alright.wav”, and select Properties from the
menu that appears.
fig.02-10.e
3
Click the Preview tab, and then click the button.
The sample data will begin playing.
fig.02-11.e
In order to listen to the
sample data, you will
need approximately 30
MB of free space on the
hard disk that contains
your system.
To Next Page
Loading...
