Roland V-Synth GT - Turning On the Power

18
Factory Reset
This restores all data in the V-Synth GT to the factory-set condition (Factory Reset).
When executing the Factory Reset, you can choose either the Version 2 or Version 1 sounds.
If there is important data you’ve created that’s stored in the V-Synth GT’s internal memory, all such data is
discarded when a Factory Reset is performed. If you want to keep the existing data, save it on a USB memory or
USB backing up onto a computer.
1.
Press [UTILITY] button to access the Utility Menu screen.
2.
Touch <Factory Reset>.
The Factory Reset screen appears.
fig.FactReset.eps
3.
Select the sounds that will be loaded following the reset.
4.
Touch <OK> to execute the Factory Reset.
It will take several minutes for the factory reset to be carried out.
5. When “Completed!” is displayed, the factory reset is finished.
Touch <OK> to return to the Patch Play screen.
Button
Description
Version 2
Following the reset, the patches, tones, and waves will be
the sounds of the V-Synth GT Version 2.
Version 1
Following the reset, the patches, tones, and waves will be
the sounds of the V-Synth GT Version 1.
GT_Analog
Following the reset, the patches, tones, and waves will be
analog synth-type sounds.
V-Synth_GT_v2_e1.book 18 ページ ２００８年１２月１７日 水曜日 午前９時５分