Roland V-Synth GT Supplementary Manual

37
Sending Arpeggio Data to MIDI Output
(Arpeggio MIDI Out Switch)
Here’s how you can output the arpeggio data from MIDI OUT and USB MIDI OUT.
1.
Press [SYSTEM] button.
2.
Touch <Arpeggio> tab.
fig.ArpMIDIOut2.eps
The Arpeggio Settings Screen appears.
3.
If you turn the <Arpeggio MIDI Out> button on, the arpeggio data will be sent from MIDI OUT.
When you turn the Arpeggio MIDI Out Switch on, the arpeggio will no longer be controlled by note messages
received at MIDI IN or USB MIDI IN.
The way in which arpeggios play in response to MIDI may differ depending on the Layer, Split, and Arpeggio
settings.
Parameter
Value Description
Arpeggio
MIDI Out
OFF, ON
If this is on, the arpeggio data will be sent from MIDI OUT and USB MIDI OUT (Default:
OFF).
When OFF
When ON
V-Synth_GT_v2_e1.book 37 ページ ２００８年１２月１７日 水曜日 午前９時５分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English