Roland V-Synth GT - Basic Operation of the V-Synth GT; Basic Operations in the Touch Panel

33
Added Functionality in the Patch Write Screen
Now you can specify the tone number when saving a patch.
1.
Touch <MENU> in the upper right of the Patch Play screen.
fig.PatchMenu2.eps
2.
In the pull-down menu, touch <Patch Write> to open the Patch Write screen.
In addition to the patch number, as before, you can touch the
symbol shown in the illustration and choose
the upper tone / lower tone to save by selecting it from a list.
fig.PatchWrite2.eps
When you press the <Search Empty> symbol shown in the illustration, the first empty patch (or tone) number
following the current save-destination number will be found and specified automatically. If none is found, the search
will occur from the first number.
fig.PatchWrite3.eps
Specify the Tone Number When Saving a Patch
Search Empty Function
V-Synth_GT_v2_e1.book 33 ページ ２００８年１２月１７日 水曜日 午前９時５分