Roland V-Synth GT Supplementary Manual

32
New Functionality in the Multi Step Modulator
This function copies a graph you created using Multi Step Modulator.
1.
In the Multi Step Modulator screen, touch <MENU> and then choose “Copy Graph...” from the
menu that appears.
fig.StepMenu.eps
The Copy Graph Pattern window will appear.
fig.StepCopy.eps
2. Select the copy-source tone number.
When TEMP is selected for “Src Tone,” you’ll need to select either <Upper> or <Lower>.
3.
Touch <Track A>–<Track D>, and select the copy-source track (Src) and copy-destination track
(Dest).
4.
Touch <Execute> to execute the copy.
Whole note and half note have been added as choices for the Multi Step Modulator grid.
Multi Step Modulator Copy Graph
Grid Additions
Parameter
Value Description
Grid (Step Grid)
Note
This specifies the note value of each step.
(Eighth note), (Eighth note triplet),
(Quarter note),
(Whole note), (Half note),
(Sixteenth note), (Sixteenth note triplet),
(Thirty-second note)
V-Synth_GT_v2_e1.book 32 ページ ２００８年１２月１７日 水曜日 午前９時５分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English