Roland VersaCamm VS-640 User Manual

138
5
To Administrators
System Management of Printer
Setting for the Menu Language and the Units of Measurement
This sets the language and units of measurement displayed on the display screen of the operation panel.
Procedure

Hold down and switch on the sub power.

Use to select the display (menu) language.
Press
to enable the setting.

Use to select the measurement unit for
length.
Press
to enable the setting.

Use to select to the measurement unit for
temperature.
Press
to enable the setting.
Default Setting
[MENU LANGUAGE]: ENGLISH
[LENGTH UNIT]: mm
[TEMP. UNIT]: °C
Setting the Interval until Activation of the Sleep Mode (Power Saving Function).
Procedure

Press .

Press several times to display the left gure.
Press
.

Press several times to display the left gure.
Press
twice.

Use to make the setting.
Press
to enable the setting.

Press to go back to the original screen.
Default Setting
[INTERVAL]: 30min
LENGTH UNIT
mm
INCH
TEMP. UNIT
C
F
MENU
SUB MENU
SUB MENU
SLEEP
INTERV AL
30min
15min
W1200mm
SETUP SHEET

Roland VersaCamm VS-640 Specifications

General

Print Technology	Piezo inkjet
Resolution	Maximum 1440 dpi
Interface	Ethernet (10BASE-T/100BASE-TX), USB 2.0
Power Requirements	AC 100 to 240 V ± 10%, 50/60 Hz
Media Width	64 inches
Cutting Speed	11.8 in/s
Ink Configuration	CMYK, Light Cyan, Light Magenta, White
Media Handling	Roll
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Metallic Silver, White
Media Thickness	Maximum 39 mil
Maximum Print Width	64 in (162.5 cm)