Switching the Ink
8
ECO-SOL MAX 3 Ink Switching Method
Windows Vista/7
When the screen shown in the gure is displayed,
click [Install this driver software anyway].
Windows XP
When the screen shown in the gure is displayed,
click [Continue Anyway].
Turn on the printer unit by switching on the sub power followed by the main power.
Connect the printer to the computer using
the USB cable.
For the USB cable, use the included cable.
Do not use a USB hub.
Windows Vista/7/8/8.1
The driver will be installed automatically. Proceed to the next procedure.
Windows XP
Select "No, not this time" and then
click [Next].
To Next Page
Loading...
