Roland VersaUV LEJ-640 F User Manual

2
Basic Operation
35
Setup of Media
About [MEDIA SETTING] menu
To ensure the optimal output according to the media size and type, various setting items are provided in this
machine. However, it is hard work to perform these settings one by one referring to this document. So, this
machine provides the [MEDIA SETTING] menu that guides these settings in the interactive mode. Using this
menu, you can set all of the basic settings only by setting according to the instructions on the display.
Since the setting details can be stored as the preset menu, you can promote your operation eciently saving
the setup steps when using the same type of media. Once storing the basic settings as the preset, you can do
ne adjustment according to need.
The items set through the [MEDIA SETTING] menu can be also set individually.
Setup of Media ([MEDIA SETTING] menu)
Note: If any setting is not needed for each setting item, you can go to the next menu by selecting [NEXT].
1. Starting the [MEDIA SETTING] menu.
X
Load media.
Check that no sagging is found on the media. If any sagging exists, the followed correction value settings
do not work eectively.
Y
Press .
Z
:KHQWKHOHIW¿JXUHLVGLVSOD\HGSUHVV .
MENU
MEDIA SETTING

Roland VersaUV LEJ-640 F Specifications

General

Print Technology	Inkjet
Ink Configuration	Cyan, Magenta, Yellow, Black, White
Resolution	1440 dpi
Connectivity	USB, Ethernet
Power Requirements	220 to 240 V ±10 %, 50/60 Hz
Operating Environment	Humidity: 35 to 80% RH