Roland VG-99 - Setting USER TUNING; Setting DETUNE

29
Chapter 2 Creating Sounds
Chapter 2
1. Press [ALTERNATE TUNING].
2. Press PAGE [ ] to display Page 1.
fig.01-060d
3. Select A or B with [F2] (A/B) or the F2 knob.
* You cannot select this when AB LINK is on.
4. Switch the function on or off with the F3 knob.
5. Use [F4] (TYPE) or the F4 knob to select USER.
6. Press [F3] (USER).
The USER TUNING screen appears.
7. Set the desired key of string with [F1]–[F6] or
with the F1–F6 knobs.
8. If you want to save the edited settings,
perform the Write procedure (p. 38).
* If you do not want to save, press [EXIT] to return to the Play screen.
For detailed information on all the parameters, refer to
“ALTERNATE TUNING” (p. 116).
1. Press [ALTERNATE TUNING].
2. Press PAGE [ ] to go to Page 2.
fig.01-060d
3. Switch the function on or off with the F2 or F5
knob.
4. If making detailed parameter settings for
DETUNE, press [F2] (DETUNE) or [F5]
(DETUNE).
fig.01-060d
5. Set the desired parameter with [F1]–[F6] or
with the F1–F6 knobs.
6. If you want to save the edited settings,
perform the Write procedure (p. 38).
* If you do not want to save, press [EXIT] to return to the Play screen.
For detailed information on all the parameters, refer to
“ALTERNATE TUNING” (p. 116).
Setting USER TUNING Setting DETUNE
VG-99_e.book 29 ページ ２００７年７月５日 木曜日 午前９時２２分