Roland VG-99 - Chapter 3 Creating Your Own Effect Types (CUSTOMIZE); Customizing Pedal Wah

41
Chapter 3 Creating Your Own Effect Types (CUSTOMIZE)
Chapter 3
1. Press [FX].
The FX Edit screen appears.
2. Press PAGE [ ] to display Page 1.
3. Press [F3] (WAH).
4. Select CUSTOM as the WAH TYPE with [F2]
(SELECT) or the F2 knob.
5. Press PAGE [ ] to display Page 2.
6. Select the basic type with [F1] (SELECT) or the
F1 knob.
7. Adjust the desired parameter with [F1]–[F5] or
with the F1–F5 knobs.
If there are other parameters you want to adjust, press PAGE
[].
8. Repeat Steps 6 and 7 as needed.
For detailed information on all the parameters, refer to
“WAH” (p. 122).
9. If you want to save the edited settings,
perform the Write procedure (p. 38).
* If not saving the settings, press [EXIT] to return to the Play screen.
Customizing Pedal Wah
VG-99_e.book 41 ページ ２００７年７月５日 木曜日 午前９時２２分