Recording to Cakewalk
1. Make the connections as shown below.
fig.13-03(cwtovs.digi.eps)
2. Follow the procedure as described in “Settings for the VS-1680” (p. 198) and
“Settings for Cakewalk Pro Audio” (p. 199), set up the system so that the
VS-1680 and Cakewalk are synchronized.
3. Make the settings to Cakewalk as shown below. For more detailed informa-
tion, please refer to your Cakewalk owner’s manual.
Settings | Audio Options... | Advanced | SMPTE/MTC Sync: “High-Quality”
* If your computer does not feature adequate performance, even with the above settings,
you may not be able to get stable digital audio output, meaning the sound will suffer
when digital connections are used. Additionally, Cakewalk Pro Audio 5.0 and
Cakewalk Professional 5.0 do not feature the above-mentioned settings. We recommend
upgrading to Version 6.0.
In the present status/condition, when record is begun with Cakewalk, MMC
is transmitted to the VS-1680, and upon receiving the MMC, the VS-1680
also begins playback. During playback, MTC is sent from the VS-1680 to
Cakewalk, thus synchronizing operations.
To Next Page
Loading...
