Recording to the VS-1680
1. Make the connections as shown below.
fig.13-04(vstocw_digi.eps)
2. Follow the procedure as described in “Settings for the VS-1680” (p. 198) and
“Settings for Cakewalk Pro Audio” (p. 199), set up the system so that the
VS-1680 and Cakewalk are synchronized.
3. Make the settings to Cakewalk as shown below. For more detailed informa-
tion, please refer to your Cakewalk owner’s manual.
Settings | Audio Options... | Advanced | SMPTE/MTC Sync: “High-Quality”
* If your computer does not feature adequate performance, even with the above settings,
you may not be able to get stable digital audio output, meaning the sound will suffer
when digital connections are used. Additionally, Cakewalk Pro Audio 5.0 and
Cakewalk Professional 5.0 do not feature the above-mentioned settings. We recommend
upgrading to Version 6.0.
4. Hold down [SHIFT] and press [F5 (SYSTEM)].
The System menu icon is displayed. If the System menu icon does not appear,
then press [F6 (EXIT)].
5. Press [F1 (SYSPM)]. If “SYSPM” does not appear in [F1], first press [PAGE]
until “SYSPM” is displayed, and then press [F1 (SYSPM)].
To Next Page
Loading...
