Roland VS-1680 - Page 48

15. Press [F4 (Exec)].
A confirmation message appears in the display. Press [YES] if you want to set
the selected routing.
fig.02-24a(apply.eps)
16. Press [F3 (SAVE)].
The Routing Save screen appears in the display. Save the routing using the pro-
cedure described in Steps 5–8 of “Storing Routings as a Single List (Template)”
(p. 41).
Storing Mixdown Settings (Mixdown)
Select this when you want adjust the balance of each track or to record a MD
recorder or similar input in two-channel stereo. Additionally, when playing back
all 16 tracks, by mixing the output of the VS-1680 along with the output of a syn-
chronized MIDI sequencer or other such device, you can also record to MD
recorders or similar devices. If you want to cancel the settings procedure while
still in progress, then press [F6 (EXIT)].
1. Press [EZ ROUTING].
The EZ Routing icon appears in the display.
2. Press [F4 (Exec)]. If “Exec” does not appear in [F4], first press [PAGE] until
“Exec” is displayed, and then press [F4 (Exec)].
fig.02-18(ez_con(rec).eps)
3. Press [F2 (Mix)].
Chapter 2 Basic Operation
48